Victoria’s Small Second Dwelling Rules: 60m² vs. 80m², Setbacks, and Permit Exemptions

Victoria’s Small Second Dwelling Rules: 60m² vs. 80m², Setbacks, and Permit Exemptions

Building a granny flat in Victoria has never been more accessible, and recent planning reforms have given Melbourne homeowners even more room to move.
 
Officially classified under the Victoria Planning Provisions as a Small Second Dwelling, a backyard residence can be rented out to commercial tenants, listed on short-stay platforms, or used to house extended family without needing a traditional planning permit in most residential areas.
 
With Amendment VC306 taking effect on 15 October 2026, the Victorian Government expanded the maximum allowable size from 60m² to 80m², giving homeowners greater flexibility in layout and design. Here is what you need to know about the current thresholds, siting rules, and permit pathways before you build.

The Big Shift: 60m² vs. 80m² Floor Area Thresholds

When Victoria first streamlined its small second dwelling reforms under Planning Victoria’s Small Second Homes Framework (Amendment VC253), the maximum floor area was capped at 60m². Under the October 2026 Amendment VC306 update to Clause 73.03, that cap increased by a third to 80m².
 
  • What Counts Toward the 80m² Limit: The threshold applies to the enclosed gross floor area of the dwelling itself. Under the updated rules, external attached decks and verandahs are excluded from the size calculation.
  • Why 60m² Still Matters: While planning schemes now allow up to 80m², Victoria’s Building Regulations 2018 are updated on a separate legislative cycle. Designs sitting at 60m² or under—such as the Kinspace Garden Residence (44m² interior, 60m² total footprint) and the Kinspace Garage Residence (59.9m² upper residence) sit comfortably inside both existing building regulations and the expanded planning threshold, avoiding transitional red tape.
Kinspace Victoria’s Small Second Dwelling Rules: 60m² vs. 80m², Setbacks, and Permit Exemptions
Register Your Interest
Garden Residences by Builtfast Homes
Thank you
Thank you for your interest in Kinspace. A member of our team will be in touch shortly.
Please enter your name.
Please enter a valid email address.
Please enter a valid phone number.
Please select your state.

When Are You Exempt From a Planning Permit?

In most standard Melbourne residential zones (including General Residential, Neighbourhood Residential, and Residential Growth zones), you do not need a planning permit to build a small second dwelling if your block meets four core conditions:
 
  1. Lot Size of 300m² or More: Your property must have a total area of at least 300m². (If your block is under 300m², you can still build, but a fast-tracked VicSmart planning permit assessed against Clause 54 standards is required).
  2. One Existing Dwelling on the Lot: There must already be one lawful main house on the block, and only one small second dwelling is permitted per property.
  3. No Triggering Overlays: Your land must not be affected by environmental, flood, or bushfire overlays (such as a Bushfire Management Overlay or Land Subject to Inundation Overlay).
    • Heritage & Design Overlay Exceptions: Even if your property sits inside a Heritage Overlay or Design and Development Overlay, you remain exempt from a planning permit provided the small second dwelling is 5 metres high or less and finished in muted tones and colours.
  4. Siting and Building Regulation Compliance: The structure must satisfy standard ResCode siting requirements covering boundary setbacks, maximum building height, site coverage, and overshadowing.

Key Siting, Setback, and Design Rules to Know

Even when a planning permit is not required, your build must still comply with the Victorian Small Second Dwellings Applicant’s Guide and Clause 54 Siting Standards:
 
  • Rear and Side Setbacks: Standard ResCode boundary setbacks apply based on wall height (typically starting at a minimum 1-metre setback for walls up to 3.6 metres high, increasing as wall height rises).
  • Position on the Block: The small second dwelling must be sited behind the front wall of the existing main house.
  • Minimum Garden Area: Depending on your residential zone and block size (typically lots over 400m²), you must still retain the mandatory minimum garden area percentage (25% to 35% of the total lot) after the granny flat is installed.
  • All-Electric Mandate: Under Victorian regulations, a small second dwelling cannot be connected to reticulated natural gas. Every Kinspace residence is engineered as an all-electric home from day one.
  • No Mandatory Extra Car Space: Planning rules do not require you to add an extra car parking space for a small second dwelling, though keeping existing parking intact or choosing a Garage Residence helps protect your property’s resale appeal.
  • No Separate Subdivision: You cannot subdivide a small second dwelling onto a separate title or sell it independently from the main house.

Planning Permit vs. Building Permit: Don’t Confuse the Two

A common misconception is that “no planning permit” means “no permits at all.”
Under Victorian law, a Building Permit and final Occupancy Permit are always mandatory. While a planning permit assesses how your dwelling affects the neighbourhood and streetscape, a Building Permit issued by a registered building surveyor verifies structural engineering, soil classifications, fire separation, 7-star NatHERS energy efficiency, and National Construction Code (NCC) compliance.
 
At Kinspace, every project begins with a comprehensive site feasibility check to verify your title, overlays, boundary setbacks, and service connections before factory production begins—ensuring your build is 100% compliant from foundation footings to final handover.
 

Worked Example: How Floor-Area Apportionment & the Section 118-192 Reset Work in Practice

To see how these ATO rules protect your equity on a real Melbourne property, let’s walk through an illustrative scenario using a $900,000 family home and a $225,000 Kinspace build.
 
 
Step-by-Step CGT Calculation
   
1. Reset Base Value (Section 118-192)
$900,000
Your original $650,000 purchase price is ignored. The $250,000 in capital growth earned before renting out the flat is 100% tax-free.
2. Add Capital Improvement Cost
+ $225,000The construction cost of the Kinspace residence is added to your new cost base.
3. Less Capital Works Claimed
– $28,125Under ATO Cost Base Adjustment Rules, building depreciation already claimed against your annual rent reduces your cost base.
Adjusted Cost Base
$1,096,875
($900,000 + $225,000 – $28,125)
4. Net Sale Proceeds
$1,365,000
($1,400,000 sale price minus $35,000 selling costs)
5. Total Capital Gain Since Reset
$268,125
($1,365,000 net proceeds minus $1,096,875 adjusted cost base)
6. Apply Floor-Area Apportionment (25%)
$67,031
75% ($201,094) remains completely exempt as your main residence. Only the 25% floor-area share is subject to CGT.
7. Apply 50% CGT Discount (>12 Months)
$33,516
Because you held the asset for over 12 months as an Australian tax resident, your taxable gain is cut in half.
What This Means for Your Bottom Line
 
  • Total Capital Profit Realised on Sale: $490,000 above your original purchase and build-out costs.
  • Net Taxable Capital Gain Added to Your Income: $33,516 (taxed at your marginal income tax rate in the year of sale—for instance, around $10,000 to $15,750 in actual CGT payable depending on your tax bracket).
  • 5 Years of Rental Income Collected: Even at a modest $450/week, the granny flat would have generated $117,000 in gross rental income over those five years—far outweighing the eventual CGT bill while simultaneously helping pay down your mortgage.
(Note: This worked example is an educational illustration based on standard floor-area apportionment. Actual calculations can vary depending on shared outdoor areas, vacant periods, or changes in residency status. Always have a registered Australian tax agent verify your specific numbers).

Love This Idea? Share the Inspiration!

Help others discover how easy backyard modular living can be. Share this article with a friend, family member, or anyone dreaming of adding their own custom space:

Private consultation

Which option works
at your home?

Kinspace which granny flats fits your home

Guided by Experts


Our sales advisory and project management teams, led by experienced specialists, act as your dedicated guides through the design, customisation, and council planning phases. While our front-facing team manages your timeline, pricing models, and factory tracking, our certified structural engineering partners and registered building nominees handle the technical sign-offs, delivering a seamless, legally bulletproof asset creation experience.

Speak with Kinspace about your property, intended use, access and preferred finish. We’ll help determine whether the Garden Suite or Garage Residence is the better fit.

Register Your Interest
Garden Residences by Builtfast Homes
Thank you
Thank you for your interest in Kinspace. A member of our team will be in touch shortly.
Please enter your name.
Please enter a valid email address.
Please enter a valid phone number.
Please select your state.